Codan 2110 Getting Started Guide

Using Quick Start
52 2110 SSB Transceiver Getting Started Guide
When all the changes have been made, the transceiver
will return to Quick Start.
1 Close Quick Start, if required.
Setting your station self address
To set your station self address:
1 Open Quick Start.
1 Scroll to Set my address, then press .
1 Enter your station self address (maximum of 6 numeric
digits for Codan Selcall, or 15 upper-case/numeric digits
if you have the MIL-STD-188-141B ALE option
installed), then press .
1 Close Quick Start, if required.
NOTE
When Quick Start is available, any self address
that you enter using this method will replace the
previous self address. If you want to enter more
than one self address, and hence disable the
Quick Start features, see the reference material
on the enclosed CD.
NOTE
For help with entering text see page 45,
Entering and editing text.

Codan 2110 Specifications

General

Brand	Codan
Model	2110
Category	Transceiver
Language	English