To Next Page

To Previous Page

Using Quick Start

2110 SSB Transceiver Getting Started Guide 51

Setting up a scan list

To set up a scan list:

1 Open Quick Start.

1 Scroll to Set scan list, then press .

The first channel in the transceiver is displayed.

1 If you want to add this channel to the scan list, press .

If you do not want to add this channel to the scan list,

press .

When all the channels have been viewed or you have

added 20 channels to your scan list, the transceiver will

return to Quick Start.

If you do not want to scroll through all the channels in

your scan list, hold to return to Quick Start.

1 Close Quick Start, if required.

Setting the time and date

To set the time and date:

1 Open Quick Start.

1 Scroll to Set time/date, then press .

The display will appear with a line under the day of the

month.

1 Use or to change the current setting to the correct

value, then press .

The line will appear under the month.

1 Repeat the previous step until you have made all of the

changes to the time and date.

CAUTION

Each time you enter Set scan list, the

resulting scan list will overwrite the

existing scan list.

Codan 2110 Getting Started Guide

Other manuals for Codan 2110