To Next Page

To Previous Page

Using Quick Start

50 2110 SSB Transceiver Getting Started Guide

Adding/Editing a channel

To add or edit a channel:

1 Open Quick Start.

1 Scroll to Add/Edit channel, then press .

1 Enter the name of the channel that you want to use, then

press .

If you want to use an existing channel, scroll to the

channel, then press .

1 Enter the receive frequency in kilohertz, then press .

1 Enter the transmit frequency in kilohertz, then press .

1 Scroll to the mode combination you want to use, then

press .

The transceiver will return to Quick Start.

1 If you want to add more channels to your transceiver,

scroll to Add/Edit channel and repeat this process.

1 Close Quick Start, if required.

NOTE

For help with entering text see page 45,

Entering and editing text.

NOTE

You can enter the frequency to three

decimal places. Press

to enter a decimal

point, then continue with entering the

frequency.

NOTE

If you want to make or receive calls on this

new channel, you must add it to your scan

list.

Codan 2110 Getting Started Guide

Other manuals for Codan 2110