Code Blue IP2501-s - 8 In-Call Commands

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-137-Hpage 46 of 67
IP1500 and IP2500 Series
Administrator Guide
8 In-Call Commands
ThespeakerphoneprovidesenhancedfunctionalitythroughtheutilizationofInCallCommands.
ThesecommandsareDTMForphonekeypadentriesmadebytheCalledparty.Belowisalistand
explanationofeachcommand.
In-Call Command Function Description
1 Play Location Message Plays the Location Recordings selected in
GeneralSettings
3 DeactivateCallTimer DeactivatestheMaximumcalldurationtimer
settingintheoperationalscriptcurrently
running
4 Activate/DeactivateAuxiliary1 ToggleAuxiliary1state;activateor
deactivate
6 MicVolumeUp Increasethemicrophonegain;usedto
increasetheCalledpartyvolume
7 MicVolumeDown Decreasethemicrophonegain;usedto
decreasetheCalledpartyvolume
8 SpeakerVolumeUp Increasethespeakervolume;usedto
increasetheCallingpartyvolume
9 SpeakerVolumeDown Decreasethespeakervolume;usedto
decreasetheCallingpartyvolume
Note:SomeVoIPcodecsdonotfullysupportDTMFTonesignallyandmaynotfunctionasintended.