Code Blue IP2501-s - 11 Configuring for Cisco Unified Communications Manager 9

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-137-Hpage 50 of 67
IP1500 and IP2500 Series
Administrator Guide
PREPARATION
1. Record the MAC address and determine the current IP address for each IP1500/2500/5000
 deviceyouwishtousewithCUCM.
2. DeterminewhichpartitionyouwillputtheIP1500/2500/5000directorynumbersinto.
3. ObtainonedirectorynumberforeachIP1500/2500/5000device.
a. IfyouaregoingtousetheIP1500/2500/5000’sdualaccountcongurationtoregis
  tertoredundantCUCMservers,obtainaseconddirectorynumberforeach
  IP1500/2500/5000device.
4. DeterminewhichcallingsearchspaceyouwillassigntotheIP1500/2500/5000.
IP5000 CONFIGURATION
RefertotheIP1500/2500/5000AdministrationANDUserGuidelocatedonourwebsite
Clear Existing Conguration
Ifnecessary,cleartheIP1500/2500/5000’sexistingconguration.ThiswillresetittoDHCP,so
makesureyouhavethecapabilitytondthedevice’sIPaddressagainifyoudothis.Foreachunit:
1. OpenaTelnetclientandconnecttotheIP1500/2500/5000.
2. Loginusingtheusernameadminandthedefaultpasswordadmin.
3. Typeformatc:codeblueandpressEnter.
4. TyperebootandpressEnter.
Congure Account(s)
1. LogintotheIP1500/2500/5000viaitswebinterface.Thedefaultusernameandpassword
are admin and admin.
2. Select Account 1.
3. ForVoIPProtocol,selectSIP&RTP.
4. UnderSIPConguration,forUsername/Number,enterthedirectorynumberyouassigned
earlier.
5. ForDisplayName,entercallerIDtext.
6. ForDomain,enterthehostnameorIPaddressoftheCUCMnodeyouwishtoregisterthis
account to.
11 Configuring for Cisco Unified Communications Manager 9