Code Blue IP2501-s - Other Settings

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-137-Hpage 51 of 67
IP1500 and IP2500 Series
Administrator Guide
7. InsureKeep-Aliveisenabled.
8. UnderProxyAuthentication,forUsername,entertheusernameyouassignedtheCUCM
 enduser,e.g.thehexadecimalrepresentationoftheMACaddressorthelocal-usevariant
for a secondary account.
9. ForPassword,enterthepasswordyouenteredintoDigestCredentialsundertheCUCM
end user.
10. ClickSave.
11. Repeatsteps3-10withAccount2ifyouareusingthesecondaccount.
Other Settings
RefertotheIP1500/2500/5000AdministrationANDUserGuidetocompletethesetupofthe
IP1500/2500/5000,includingNumbers,GeneralSettings,HardwareSettings,andActionScripts.
Whennished,clickApplyNowtorestartthephone;itshouldnowregistertoCUCMandbeableto
placecallsintheassignedcallingsearchspaceaswellasreceivecallsatthedirectorynumberitis
conguredwith.
Note: if you are setting up the IP1500/2500/5000 with secondary account support, make sure
that you create each failover number twice.
UCM CONFIGURATION
AllUCM-sidecongurationisdonewithintheCiscoUniedCMAdministrationwebinterface.
Create Phone Security Prole
1. NavigatetoSystem>Security>PhoneSecurityProle.
2. DoaFindon“Third-party”tolocatetheThird-partySIPDeviceBasic-StandardSIPNon-
 SecureProle.ClicktheCopyicon.
3. Check Enable Digest Authentication.
4. ChangetheNameandDescriptiontoCodeBlueIP1500-2500-5000Prole.
5. ClickSave.
Congure End Users
ForeachIP5000device,congureanewenduserforSIPauthentication.
1. NavigatetoUserManagement>EndUser.
2. Click Add New.
3. FortheUserID,enterthehexadecimalversionoftheMACaddress;e.g.00:50:C2:17:7B:E8