3. The functions available from the internal keypad are as follows:
(a) Advance Coffee Brewer.
If a coffee brewer is fitted, a single depression of this key will cause the brewer unit to
index to its next position in the cycle. The purpose of this function is to allow the brewer
to be locked prior to a flush cycle so that cleaning agents can be added.
(b) MDB Mech Dispense Coin.
This key provides a method to empty the change tubes of an MDB coin mechanism,
which does not itself possess the necessary buttons to do so. On pressing the key, the
external display will change to: -
EMPTY TUBE
£0.05 ENTER OR ESC
The currency value shown will be that of the lowest value coin tube in the coin
mechanism. The function of the EXTERNAL keys will change as described in section 3
to allow actions to be performed on either the internal or external keypad. Pressing
ENTER will cause a coin to be dispensed from the currently selected tube. Pressing the
(UP) or (DOWN) selects the next/previous coin tube. Repeated use of the (UP),
(DOWN) & ENTER keys enables all tubes to be emptied. Pressing the ESCAPE key
ends the process.
(c) Brewer Flush
This key provides the means to initiate a flush cycle of the fresh brew units. A single
press of this key will initiate a cleaning cycle for all brewers fitted to the machine
simultaneously. In the case of the instant version this function is redundant.
(d) Syrup 1 Prime
Manually controls the pump associated with flavored syrup number 1. The first press
turns on the pump; a second press turns it off again. Pressing the ESC key will also turn
off the pump.
(e) Syrup 2 Prime
Manually controls the pump associated with flavored syrup number 2. The first press
turns on the pump; a second press turns it off again. Pressing the ESC key will also turn
off the pump.
(f) Prog
This key activates the code entry sequence required to access the protected levels of
the machine control programs. See section 3.
(g) Advance Tea Brewer.
If a tea brewer is fitted, a single depression of this key will cause the brewer unit to index
to its next position in the cycle. The purpose of this function is to allow the brewer to be
locked prior to a flush cycle so that cleaning agents can be added.
To Next Page
Loading...
Need help?
General