CAUTION HOT WATER
THE WATER AVAILABLE FROM THE OPTION SHOWER HEAD CLEANING ATTACHMENT IS
HOT ENOUGH TO SCALD OR BURN. APPROPRIATE CARE MUST BE TAKEN WHEN USING
THIS ATTACHMENT.
NOTE: INITIALLY THE WATER FLOWING FROM THE ATTACHMENT WILL BE COOL, BUT IT
WILL RAPIDLY BECOME EXTREMELY HOT.
Care must be taken to protect the beverage machine from frost. Do not attempt to
operate the machine if it becomes frozen. Contact the nearest service agent
immediately. Do not restore the machine to operational use until it has been checked
and approved for use by the service agent.
SERVICES REQUIRED
4.
(a) Electrical Supply: 240V, 50Hz, 13A fused.
(b) Water Supply: 15mm BSP stopcock - 0.1 MPa min, 0.8 MPa max.
A double check valve MUST be fitted and for Hot and Cold Still
Machines a 35psi regulator must be fitted.
A water blocker MUST be fitted in the mains water supply line.
INSTALLATION
WARNINGS
a. THE BEVERAGE MACHINE IS A HEAVY ITEM. ENSURE THAT SUFFICIENT
PERSONNEL ARE AVAILABLE FOR LIFTING AND TRANSPORTING THE
MACHINE. USE PROPER LIFTING PROCEDURES AND EQUIPMENT.
b. ENSURE THAT THE MAINS ELECTRICAL SUPPLY IS ISOLATED BEFORE
CONNECTING THE ELECTRICAL SUPPLY CABLE TO THE MACHINE.
c. ENSURE THAT THE MAINS WATER SUPPLY IS ISOLATED BEFORE
CONNECTING THE WATER SUPPLY HOSE TO THE MACHINE.
d. THE BEVERAGE MACHINE MUST BE EARTHED.
e. DO NOT EARTH THE BEVERAGE MACHINE TO THE MAINS WATER SUPPLY
PIPE.
To Next Page
Loading...
Need help?
General