ComAp IG-NT Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
306
Analog input: Cyl temp 2
Related FW
3.0
Description
Logical analog input for cylinder temperature #2. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 3
Related FW
3.0
Description
Logical analog input for cylinder temperature #3. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 4
Related FW
3.0
Description
Logical analog input for cylinder temperature #4. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 5
Related FW
3.0
Description
Logical analog input for cylinder temperature #5. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 6
Related FW
3.0
Description
Logical analog input for cylinder temperature #6. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 7
Related FW
3.0
Description
Logical analog input for cylinder temperature #7. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:

ComAp IG-NT Specifications

General

Brand	ComAp
Model	IG-NT
Category	Controller
Language	English