IGS-NT Communication Guide
51
Controllers
Controllers IG-NT-BB IG-NTC-BB IS-NTC-BB IM-NTC-BB IM-NT-BB
Connectionapplicable NO YES YES YES NO
Available ports
external bridge
IB-NT
RS232(2) RS232(2) RS232(2)
external bridge
IB-NT
More info
IG/IS/IM-NTC-BB - Communications (page
12)
Controllers IG-NT IG-NTC IS-NT-BB IM-NT
Connectionapplicable NO NO NO NO
Available ports
external bridge
IB-NT
external bridge
IB-NT
external bridge
IB-NT
external bridge
IB-NT
IMPORTANT: Connection via AirGate is supported by controllers with direct connection to LAN
only or via IB-NT module.
Connection to InteliMonitor via AirGate server
Select the AirGate connection type.
Fill-in the correct AirGate ID for each controller.
Enter the AirGate server address.
Note: You will obtain the AirGate ID by the registration of the particular controller on the AirGate server. Set all
setpoints in Comms Settings group according to AirGate connecgtion settings and connect controller to LAN.
Controller AirGate ID will be viewed on the screen.
Note: This function is available in InteliMonitor ver. 2.6 and higher. Please watch the ComAp a.s. web site for
detailed information.
Note: Although the controllers in your site are not connected together by the CAN2 bus they must have
different controller addresses.
To Next Page
Loading...
Need help?
General
