IGS-NT Communication Guide
54
Image 4.4 Port forwarding example for Web connection
The web server is designed for basic monitoring and adjustment of the controller using a web browser. Put the
Controller IP address into the browser. You will be asked for the controller access code prior to entering the
controller web.
Note: The web server is optimized for IE6 or higher and screen resolution 1024x768 pixels.
Note: For update inbuilt Ethernet module see IB-COM manual. Or add suffix to IP address “/sp_index.htm” and
follow instructions, eg: “192.168.1.1/sp_index.htm”.
IMPORTANT: Do not use the browser navigation buttons as "Back", "Forward" or "Reload". Use
the links and the reload button located in the toolbar instead.
4.4.1 Scada
Click to the SCADA link in the toolbar to display the scada page. The scada page is also the main page which is
displayed by default if you just put the controller address into the browser.
Note: The scada page layout may differ according to the firmware branch, version and application. Certain old
firmware versions does not support web access at all.
To Next Page
Loading...
Need help?
General
