EasyManua.ls Logo

COMBISAFE System Mk II - Technical Data: Required PFPE

COMBISAFE System Mk II
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Loading System MkII Technical Data
15
Personal Fall Protection Equipment
To create a complete system to protect the operative when working at height,
the Loading System MkII needs to be equipped with Personal Fall Protection
Equipment (PFPE). Figure 10 shows an example of how to equip the
SkyReach Anchor with recommended PFPE. All PFPE that is used must be
certified according to valid standards and approved in the specific country of
use.
The following PFPE is approved to be used together with the SkyReach
Anchor and the Loading System MkII:
SRCL ................. Fall Arrest Block
certified to EN 360
Only the Miller Falcon 6,2 m, or the Miller Falcon 10 m
when a Double Unit is used, has been tested and approved
in combination with the Loading System MkII and SkyReach
Anchor, and thus the only SRCL that will enable the system
to be CE certified. Use of other SRCL will invalidate the
CE certification.
Harness .............. Full body harnesses certified to EN 361
Lanyard .............. Non shock absorbing lanyards certified to EN 354
Can be used separately or in combination with EN 355
certified lanyard, or with a max length of 0,6 m in
combination with the Falcon Fall Arrest Block.
Lanyard .............. Shock absorbing lanyards certified to EN 355
Can be used separately or in combination with an EN 354
certified lanyard. Must NOT be combined with the Falcon
Fall Arrest Block.