DX-80 HARD DRIVE VOICE MAIL INSTALLATION AND SUPERVISOR GUIDE 09/01
86
3. System Supervisor Instructions
The procedures provided in this section indicate how a system supervisor can make changes
to the system setup by calling into the system using a telephone. Each of these procedures
can also be performed by accessing the Voice Mail software screens through a serial
connection to a laptop PC. For procedures on making modifications through the screen
interface, refer to procedures earlier in this document.
3.1 Working with Mailboxes
3.1.1 Adding, Deleting, or Modifying a Mailbox
1. From a telephone, call into voice mail and log into the supervisor mailbox 70. The
system voices the Main menu:
“To listen to your messages press 1. To send a message press 2. To change your options
press 3.”
2. To access the Supervisor menu, press 6 (this option is not voiced). The system voices
the Supervisor menu options:
Supervisor Menu
For Mailbox Administration Press 1
For Routing Box Administration Press 2
For Question Box Administration Press 3
For Port Administration Press 4
To Change the System Broadcast Message Press 5
To Change the Voice Mail Day / Night Service Press 6
To Change the System Time Press 7
To Change the System Date Press 8
To Modify System Parameters Press 9
To Perform First-Time Setup Press 0
To Exit Press #
To Next Page
Loading...
