Comelit 1456B - Connection to Configuration Web Pages; 1 A) Remote Connection; 1 B) Local Connection

26
http://
http://
:8080
:8080
.comelitdns.comregistered hostname
example = host_name3.comelitdns.com
public ip
example = 213.149.219.88
a
b
http:// :8080interface A IP address
default = 192.168.1.200
1A) Remote connection
2) Login
1B) Local connection
√ it is necessary to perform Dyn DNS configuration (see “4) DynDNS configuration for remote connection”) and open port
8080 (see “5) Port Forwarding setting for remote connection”) on the router
√ an active internet connection is also required.
1A. Enter the registered hostname or the public IP address, as in the following examples, and press enter.
√ With the PC connected via Ethernet cable to interface A of art. 1456Ba and IP address belonging to the same network as
interface A.
1B. Enter the IP address of interface A as in the following example, and press enter.
1. Press Login [a]
2. Enter the installer password (default= comelit) and confirm by pressing Login [b]
Connection to the configuration web pages
From the web pages you can perform all of the operations available on ViP Manager except license
activation.
The backup and restore function is only available on the web pages.