9
f
h
i
g
e
2. Launch the system scan by pressing Scan System [e].
» all the devices connected to the system will be displayed in the device list.
3. Select the device 1456 B [f], select Addressing/ViP address [g], assign an unequivocal ViP address to the device [h] and
press Write page [i] to save the current settings.
In the case of a system with 2 1456B devices, it will be necessary to assign to interface A of one of the two
devices a new “Static IP address” (as described in "case 2"), as each device must have a unequivocal IP
address.
To Next Page
Loading...
