Commend C-G8-S0 - Page 32

Telephone Interface G8-S0/G3-S0-I
32 1.1/1010
Call Request in PABX Mode
 The “Dialling Sequences” and “Telephone Numbers” are configured as described on see page 25.
 The telephone interface has to be configured as “central control desk” (at “Subscriber” – “Control
Desks”).
 For the calling station, a “call request” has to be configured to the telephone interface (at
“Subscriber” – “Call Request”).
 For a calling input, an “input message” has to be configured to the telephone interface (at “Inputs”–
“Input message”).
Note:
For the configuration of the following described features, see current version of the manual “PRO 800”.
Attention:
If the indication of input messages via buzzer is deactivated, no call is issued to the telephone (tab
“Call types” at “Inputs” – “Input message”)!