CommScope Instruction Guide
860647713, Rev B, V.05
Page 16
38 Pages
Figure 21. Plinth Mounting Footprint, Bottom and Top Views, CMC-21/28/35
2. Obtain bolts and washers from installation kit.
■ Concrete Pad—Thread bolts with washers into anchors or inserts, 1.5" bolts with 1/2" lock and
flat washers, along with the rubber washers, Figure 22. Do not tighten bolts until all are in place.
■ Steel Structure—Fasten cabinet to steel structure with customer provided 1/2" x 2.5" bolts, nuts,
flat and lock washers, Figure 23.
Figure 22. Fastening Cabinet to Concrete Pad
Figure 23. Fastening Cabinet onto Steel Structure
To Next Page
Loading...
