M300 Pro GNSS Receiver User Guide
4.9 User Management
Use user management menu to add, delete users or edit limits of authority.
Click Add User button, enter the name, password, and choose limits of authority,
then click Enter, you will add a user successfully. The maximum number of user is
100.
5. Programmatic Interface
This section describes a method of controlling M300Pro receiver through
programmatic commands. It provides a more machine friendly method for users to
check and configure receivers, such as base/rover, NMEA data output. Please read
these tips before sending commands to your M300Pro receiver.
Select and send proper commands, all commands are case insensitive: Log
version=LOG VERSION
Press Enter button at the end of every command to check receivers’
feedback information or input another command
For More detailed programmatic commands, please refer to ComNav OEM
CARD REFERENCE MANUAL
WARNING-These commands are only suitable for COM1. The COM2 and COM3 are
connected to the web interface, please do not change the baud rate and the data output of
these two ports.
To Next Page
Loading...
