M300 Pro GNSS Receiver User Guide
including Tracking Table, Tracking Chat and Sky View. You can enable/disable GPS,
BDS, GLONASS, GAL and SBAS (WAAS/EGNOS/MSAS) satellites’ display without
stopping tracking status.
These displays refresh every 5 seconds, always keeping satellites information up to
date.
4.5 Data Record
Use the data record menu to set the storage mode (internal/external) for surveying
date, and download data to your office computer, especially for the remote receiver
control.
4.5.1 Recording Config
Information is showed below：
Internal Memory: 32 GB, 1 Hz sample frequency could be used for 8-month
record.
To Next Page
Loading...
