Compaq Armada E500 Series Maintenance And Service Guide

Removal and Replacement Procedures 5-13
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: The Integrity Group Saved by: The Integrity Group Saved date: 10/26/00 12:36 PM
Part Number: 128679-006 File name: Ch05
Removing a Memory Expansion Board
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.7).
3. Spread the retaining tabs apart
1
. The memory expansion board
tilts upward (Figure 5-10).
4. Lift the edge of the memory expansion board and slide it gently out
of the memory expansion slot at a 45-degree angle
2
.
5. Place the memory expansion board in an electrostatic-safe
container.
Figure 5-10. Removing a Memory Expansion Board

Compaq Armada E500 Series Specifications

General

Processor	Intel Pentium III
Chipset	Intel 440BX
Optical Drive	24x CD-ROM or DVD-ROM
Networking	10/100 Ethernet
Wireless	Optional 802.11b
RAM	Up to 512 MB
Display	14.1-inch TFT, 1024x768 resolution
Graphics	ATI Rage Mobility with 8 MB
Ports	USB, Parallel, Serial, VGA, PS/2, Infrared
Battery	Lithium-Ion
Operating System	Windows 98, Windows 2000
Storage	6 GB - 12 GB Hard Disk Drive
Battery Life	Approximately 2-3 hours