Troubleshooting 2-13
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: The Integrity Group Saved date: 10/26/00 11:45 AM
Part Number: 128679-006 File name: Ch02
Advanced Menu
Begin here To do this
Language (or press
F2
)
Change the Computer Setup
language
Boot Options Enable/disable:
■
QuickBoot, which starts the
computer more quickly by
eliminating some startup tests
(If you suspect a memory failure
and want to test memory
automatically during startup, you
may want to disable QuickBoot.)
■
MultiBoot, which enables you to
set a startup sequence that can
include any drives in the system
Device Options
■
Enable/disable the embedded
numeric keypad at startup
■
Enable/disable multiple standard
pointing devices at startup
When this feature is disabled,
only one pointing device is
activated at startup.
■
Enable/disable USB legacy
support for one USB mouse and
one USB keyboard
(When USB legacy support is
enabled, the keyboard and
mouse work without a loaded
USB driver.)
■
Set as the primary device an
optional external monitor or
overhead projector connected to
a video card in a docking base.
(When the computer display is set
as secondary, the computer must
be shut down before undocking.)
■
Set video-out mode to NTSC
(default), NTSC-J, PAL, or PAL-M
■
Change the parallel port mode to
or from EPP, standard, bi-
directional, or ECP
To Next Page
Loading...
Need help?
General
