Removal and Replacement Procedures
Maintenance and Service Guide 5–41
✎
The microphone and cable are included in the Display Cable
Kit, spare part number 430904-001.
28. If it is necessary to replace the microphones and cables,
release the retention tabs 1 built in to the display enclosure
lining that secure the microphones and cables to the
display enclosure.
29. Remove the microphones from the clips 2 in the
display enclosure.
30. Remove the microphone cables 3 from the display enclosure.
Removing the Microphones
Reverse the above procedure to reassemble and install the
display assembly
To Next Page
Loading...
