Compaq Presario V3000 User Manual

B–8 Maintenance and Service Guide
Backup and Recovery
Reinstalling Preinstalled Programs and
Drivers
1. Remove the program or driver:
✎
In some cases, drivers are not listed in the Add or Remove
Programs list. If the driver is not listed, it does not need to be
removed.
a. Select Start > Control Panel > Add or Remove
Programs.
b. Click the program or driver you want to remove, and then
click Change/Remove.
2. Select Start > All Programs > System Recovery >
Application and Driver Recovery.
The Application and Driver Recovery tool opens.
3. Select Application Installation or Driver Installation, and
then click Next.
4. Follow the on-screen instructions to complete the program or
driver recovery.
5. Restart the computer if prompted.
Reinstalling Programs from Discs
1. Insert the disc into the optical drive.
2. When the installation wizard opens, follow the installation
instructions on the screen.
3. Restart the computer if prompted.

Compaq Presario V3000 Specifications

General

Wireless	802.11b/g
Audio	Altec Lansing speakers
Battery	6-cell Lithium-Ion
RAM	Up to 2 GB DDR2 SDRAM (expandable)
Display	1280x800
Graphics	Intel GMA 950
Operating System	Windows Vista
Optical Drive	DVD±RW
Ports	3x USB 2.0, VGA, S-Video, RJ-45, RJ-11, headphone/microphone jacks
Card Reader	5-in-1
Networking	10/100 Ethernet
Processor	Intel Core 2 Duo
Storage	120GB HDD