Compex SXP2224WM - Chapter 2 Getting Started; Packaging Content; Setup Considerations; Software Requirements

Chapter 2 Getting Started
7
Chapter 2 Getting Started
This chapter outlines the basic requirement for any installation and configuration of Compex
SXP2224WM.
2.1 Packaging Content
Thank you for purchasing the Compex Web Managed Switch SXP2224WM. You will
find the following items in the package:
• 1 x Compex SXP2224WM unit
• 4 x rubber foot
• 1 x Power Cord
• 2 x brackets
• 8 x screws
• 1 x RS232 serial console cable
• 1 x Quick Install Guide with warranty card
• 1 x Product CD (Web browser, Acrobat Reader, User’s Manual)
2.2 Setup Considerations
Prepare checklist before you start:
.
• Check your Local Area Network configurations. Check if the network has Static
IP addressing or dynamic IP assignment.
• Check whether any of the browsers (Netscape Navigator, Netscape
Communicator or Microsoft Internet Explorer) is installed in your PC.
2.2.1 Software Requirements
• Windows 95/98/2000/NT/ME/XP
• Any other TCP/IP-enabled systems like Mac OS and UNIX
• Web Browser, such as Microsoft Internet Explorer (4.0 and above) or
Netscape Navigator (4.0 and above)
2.2.2 Hardware Requirements
• RJ45 Category 3, 4 or 5 MDI or MDXI Ethernet cable and Compex
SXP2224WM unit