Computherm E300 - Installing the Mobile Application; Connecting to Wi-Fi Network

- 18 -
6.5.Installingtheapplication
The thermostat can be controlled by both a smartphone and a
tablet with the help of free application COMPUTHERM E Series.
Application COMPUTHERM E Series can be downloaded to iOS
and Android operating systems. The applications are acces-
sible through the following link or using a QR code:
http://quantrax.hu/computherm-wi--termosztatok/
6.6.ConnectingthethermostattoaWi-Finetwork
• On your phone/tablet switch on Wi-Fi connection.
Join the Wi-Fi network to be used for the thermostat.
• Start the COMPUTHERM E Series application.
• Turn o󰀨 the device by tapping button on the thermostat.
• Touch and hold button while tapping button for a short
time. Then the thermostat enters the settings menu: in the
left bottom corner “SEN” appears and the set temperature
will be replaced by numbers 00 .
• Then touch button 9 times and abbreviation FAC ap-