Computherm E300 - Connecting to User Account; Controlling by Multiple Users

- 20 -
• On the appearing page “SearchList” you can choose the
thermostat you wish to assign to the installed application.
Touching the name of the thermostat concerned, it is assig-
ned to the application and from now on the thermostat can
be controlled from anywhere. Following this, on the start
screen of the application all assigned thermostats appear,
together with currently measured (PV) and set (SV) tempe-
ratures.
6.8.Controllingthethermostatbymultipleusers
When several users wish to control the same thermostat, after
the thermostat has been put into operation the following steps
should be carried out to add further users:
• Connect your smartphone/tablet to the Wi-Fi network to
which the COMPUTHERM E300 thermostat has been con-
nected.
• On the apparatus you want to use for controlling download
then start application COMPUTHERM E Series.
• Tapping the “Search” icon in the left bottom corner, the pho-
ne/table will search COMPUTHERM E300 thermostats con-
nected to the Wi-Fi network concerned.
• On the appearing page “SearchList” you can choose the