EasyManua.ls Logo

Computherm E300 - Manual Mode Operation

Computherm E300
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 34 -
You can switch between the modes in the following way:
Using phone application: by touching or icons
On the thermostat: touching the button
The currently selected mode is indicated as follows:
In the phone application: manual mode by the
icon
and programmed auto mode by the icon
On the thermostat: manual mode by the icon prog-
rammed auto mode by one of the following icons
(according to the current switching scheme).
The two modes are described in detail in the following
sub-chapters.
10.1.Manualmode
In manual mode the thermostat maintains a preset temperatu-
re until the next intervention. If the room temperature is lower
than that set on the thermostat, the output of the thermostat
will switch on. If the room temperature is higher than that set
on the thermostat, the output of the thermostat will switch o󰀨
(as already described in Chapter 9). The temperature to be
maintained by the thermostat can be specied in 0.5°C steps
(the minimum and maximum values of the adjustable range are
5°C and 99°C, respectively).

Table of Contents

Related product manuals