- 33 -
10. SWITCHING BETWEEN ON AND OFF POSI-
TIONS AND MODES OF THE DEVICE
The thermostat has the following 2 positions:
• Oposition
• Onposition
You can switch between o and on positions in the following
way:
• Using phone application: by tapping the icon
• On the thermostat: tapping the button
When the thermostat is o, the screen of the devices turns o
and in the application POWER-OFF lettering replaces measu-
red and set temperatures, and the relay outputs of the device
go into o (open) position. When the thermostat is on, the disp-
lay of the device illuminates continuously. If you touch the touch
buttons or modify the settings of the thermostat with the phone
application, the light intensity on the thermostat gets higher for
approx. 10 seconds then falls back to basic level.
When the thermostat is on, it possesses the following 2 modes
of operation:
• Manual mode
• Programmed auto mode
To Next Page
Loading...
