Computherm E300 - Programmed Auto Mode

- 35 -
The currently set temperature can be modied in the following
way:
• Using phone application:
 with the icons
 moving the slide (groove) on the circular scale
• On the thermostat: with the buttons
10.2.Programmedautomode
10.2.1Descriptionoftheprogrammedmode
Programming means setting of switching times and selection
of corresponding temperature values. Any temperature set for
a switch will remain in e󰀨ect until the time of the next switch.
Switching times can be specied with an accuracy of 1 minu-
te. Within the temperature range (the minimum and maximum
values of the adjustable range are 5°C and 99°C, respectively)
specied in the settings a di󰀨erent temperature can be chosen
for each switching time, in 0.5°C steps.
The device can be programmed for a period of one week. In the
programmed auto mode the thermostat operates automatically,
and cyclically repeats the entered switches every 7 days. The
following 3 options are available to program the thermostat:
• 5+2mode: setting 6 switches per day for 5 working days