Computherm E300 - Connecting the Thermostat to a User Account

- 19 -
pears in the left bottom corner.
• By tapping button several times alter the number 08
ashing in the middle on the right side to 10 or 32.
• Touch the button again.
• Touch and hold button while tapping button for a
short time. Then the display of the thermostat turns on and
its top line the symbol starts to ash rapidly.
• Now touch the “Congure” icon in the right bottom corner in
the application.
• On the appearing page enter the name and password of the Wi-
Fi network to be used than click on “StartConnection” icon.
• The connection has been established successfully between
the thermostat and the Wi-Fi network when on the display
of the thermostat the symbol starts to illuminate conti-
nuously.
6.7.Connectingthethermostattoauseraccount
• You can search for COMPUTHERM E300 thermostats
connected to the Wi-Fi network concerned by tapping the
“Search” icon in the left bottom corner (i.e. this requires that
the thermostat is connected to the same Wi-Fi network used
for the phone).