- 26 -
the
button for a short time.
- Now you enter the settings menu: in the left bottom cor-
ner “SEN” appears and the set temperature will be repla-
ced by numbers 00.
- Tapping the button you can switch between the func-
tions to be set.
- A given function can be set by arrows.
- To reset scroll through the settings with the button
then leave the last setting option (FAC) at the basic value
(08) and tap the button again.
Attention! To save a given modication, scroll through the set-
tings menu with the help of the button. Leaving the last
setting option (FAC) at the basic value (08) and tapping the
button the device exits the setting menu, saving the setting at
the same time. In other cases (e.g. when you touch the power
o button of the thermostat after the setting has been modied)
there is no guarantee that the modication of the setting will be
saved and enters into eect.
The setting options are shown in the table below:
To Next Page
Loading...
