Computherm E300 - Page 38

- 38 -
- for 7+0mode:1234567
Now touch the button again.
c) Following this, you can specify or modify various switch times
and temperatures as follows:
- You can switch between switch times with the but-
ton.
- With the help of you can switch between data
belonging to switch times (temperature, hour value of
the time, minute value of the time).
- Values are always set by buttons.
After the program of weekdays has been set, you can
set the program of the days of the weekend. The day
and switch being set are shown by the icon ashing on
the display.
d) Programs that were set earlier can be checked at any time
by repeating the steps of programming mode.
Attention! In the interest of logical programming ensu-
rethatinprogrammingthetimesofsuccessiveswitches
succeedeachotherduringthecourseoftheday,i.e.you
shouldspecifyswitchesinchronologicalorder.