48
Frame rate settings
*By changing the settings, the microSDHC card will be reformatted
• Frame rate of video footage to record can be selected from [9.1 fps /
19.1 fps / 29.1 fps / time lapse 1 frame / time lapse 3 frames].
[9.1 fps / 19.1 fps / 29.1 fps
] ......... Records video footage by the selected frame rate.
[Time lapse 1 frame]
.........
Takes one picture in a second and records the video foot-
age by reducing those pictures to a 15 fps moving picture.
[Time lapse 3 frames
] .........
Takes three pictures in a second and records the video foot-
age by reducing those pictures to a 15 fps moving picture.
• By default, it is set to [19.1 fps].
Caution
• When setting it to [Time lapse 1 frame] or [Time lapse 3 frames], it will record one
frame per second as a maximum, so there may be cases where the exact moment
of an accident is not recorded depending on the timing.
• There may be cases where LED light sources including signals, brake lights, turn
signals or tail lamps are not recorded.
• If you set it to [9.1 fps], [Time lapse 1 frame] or [Time lapse 3 frames], you cannot set
>/HDGLQJYHKLFOHVWDUWXSQRWL¿FDWLRQIXQFWLRQ@DQG>)URQWVLJQDOQRWL¿FDWLRQIXQFWLRQ@
• ,I\RXVHWLWWR>/HDGLQJYHKLFOHVWDUWXSQRWL¿FDWLRQIXQFWLRQ@DQG>)URQWVLJQDOQRWL¿FDWLRQ
function], you cannot select [9.1 fps], [Time lapse 1 frame] or [Time lapse 3 frames].
Advice
Regarding frame rate
Frame rate means the number of recorded frames per second and it is measured by
the unit of frames per second (fps). The larger the fps value, the smoother the video
IRRWDJHLVSOD\HGEDFNKRZHYHUWKHGDWDV¿OHVL]HDOVRLQFUHDVHVDQGIHZHUUHFRUG-
ings can be stored on a microSDHC.
Regarding [Time lapse 1 frame] and [Time lapse 3 frames] settings
• When changing the settings to [Time lapse 1 frame] or [Time lapse 3
IUDPHV@WKHFKDQJHFRQ¿UPDWLRQVFUHHQZLOOEHGLVSOD\HG
• Regardless of the settings for [Sound record setting], it will not record
sound.
I
mage quality settings
*By changing the settings, the microSDHC card will be reformatted
• You can select the video footage image quality from [High quality /
Low quality].
• By default, it is set to [High quality].
Setting