Comtech EF Data UT-4505 - Page 107

UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Front Panel Operation Revision 3
6–13
(REMOTE:) ETHERNETSNMPTRAPS
TRAPIP1 TRAPIP2 VERSION
Use the   keys to select TRAPIP1, TRAPIP2, or VERSION. Press ENTER.
(REMOTE:) ETHERNETSNMPTRAPSTRAPIP1/TRAPIP2
If both Trap IP Addresses are 000.000.000.000, it means that Traps are
disabled.
TRAP IP ADDRESS #1:
000.000.000.000
TRAP IP ADDRESS #2:
000.000.000.000
Typical for both submenus: View or edit the Trap Destination IP Address. To
edit, use the   keys to select a digit, and then use the  keys to change
that digit. Press ENTER.
(REMOTE:) ETHERNETSNMPTRAPSVERSION
Trap Version:
SNMPv1 SNMPv2
Use the  keys to set the trap version as SNMPv1 or SNMPv2. Press ENTER.