UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Ethernet Interface Operation Revision 3
7–3
o OID: 1.3.6.1.4.1.6247
o Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
comtechEFData(6247)
o Module: ComtechEFData
7.2.1.2 DT-45xx Common MIB File
• FW-0020205x.mib
• MIB file consists of all of the OID’s for management of the unit functions.
7.2.1.3 DT-45xx Traps MIB File
• FW-0020206x.mib
• Trap MIB file provides SNMPv1 traps common for the unit.
7.2.2 SNMP Community Strings
CAUTION
In SNMP v1/v2, the SNMP Community String is sent unencrypted in the
SNMP packets. Caution must be taken by the network administrator to
ensure that SNMP packets travel only over a secure and private network
if security is a concern.
For correct SNMP operation, the converter MIB files must be used with
the associated version of the unit M&C. See the DT-45xx FW Release
Notes for information on the required FW/SW compatibility.
The UT-4500 uses Community Strings as a password scheme that provides
authentication before gaining access to the router agent’s MIBs. They are used
to authenticate users and determine access privileges to the SNMP agent. The
UT-4500 defines three Community Strings for SNMP access:
• Read Community default = public
• Write Community default = private
• Trap Community default = comtech
Type the SNMP Community String into the user-supplied MIB Browser or
Network Node Management software.
To Next Page
Loading...
