EasyManua.ls Logo

Comtech EF Data UT-4505 - MAC (Media Access Control Address); IPA (IP Address); IPG (IP Gateway)

Default Icon
208 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Serial Interface Operation Revision 3
8–13
8.7.2.6 MAC (Media Access Control Address)
Use MAC to return the unique MAC address of the rear panel ‘Ethernet’ M&C
port.
Description
Details
Return MAC:
<DEV/MAC_{cr}
Confirmation:
>DEV/MAC_xx-xx-xx-xx-xx-xx{cr}{lf}] where:
xx=MAC address byte in hexadecimal
8.7.2.7 IPA (IP Address)
Use IPA to set or return the Management IP Address and network prefix for the
rear panelEthernet’ M&C port. The factory default value is 192.168.1.4.24.
Description
Details
Set IP Address:
<DEV/IPA_aaa.bbb.ccc.ddd.yy{cr} where:
aaa = 0 to 223*
bbb = 0 to 255*
ccc = 0 to 255*
ddd = 0 to 255*
*Values cannot all be zeroes.
yy = Subnet Mask Length (8 to 30)
Confirmation:
>DEV/IPA_ aaa.bbb.ccc.ddd.yy{cr}{lf}]
Return IP Address:
<DEV/IPA_{cr}
Confirmation:
>DEV/IPA_ aaa.bbb.ccc.ddd.yy{cr}{lf}]
8.7.2.8 IPG (IP Gateway)
Use IPG to set or return the IP Gateway Address for the rear panelEthernet’
M&C port. The factory default value is 192.168.1.5.
Description
Details
Set IP Gateway:
<DEV/IPG_aaa.bbb.ccc.ddd{cr} where:
aaa = 0 to 223*
bbb = 0 to 255*
ccc = 0 to 255*
ddd = 0 to 255*
*Values cannot all be zeroes.
Confirmation:
>DEV/IPG_ aaa.bbb.ccc.ddd{cr}{lf}]
Return IP Gateway:
<DEV/IPG_{cr}
Confirmation:
>DEV/IPG_ aaa.bbb.ccc.ddd{cr}{lf}]

Table of Contents

Related product manuals