EasyManua.ls Logo

Conair 100 - Page 20

Conair 100
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-6 l Description
Specifications: D Carousel
DEHUMIDIFYING DRYERS
D Small Series Carousel Dryers
MODEL D15 D25 D50 D75 D100
Performance characteristics (with full hopper)
Air flow {SCFM}
*
12 20 35 50 80
Air flow {ACFM @ 250
°
}
*
16 27 47 67 107
Drying temperature All models 100 - 375
°
F {38 - 191
°
C} with options
Dew point All models -40
°
F {-40
°
C}
Dimensions inches {cm}
A - Height 35.5 {90.2} 35.5 {90.2} 35.5 {90.2} 42.1 {107} 42.1 {107}
B - Overall width 17.3 {43.9} 17.3 {43.9} 17.3 {43.9} 22.0 {55.9} 22.0 {55.9}
C - Control width 15.7 {39.9} 15.7 {39.9} 15.7 {39.9} 15.7 {39.9} 15.7 {39.9}
D - Depth 24.8 {63.0} 24.8 {63.0} 24.8 {63.0} 30.3 {77.0} 30.3 {77.0}
Control depth 7.3 {18.5} 7.3 {18.5} 7.3 {18.5} 7.3 {18.5} 7.3 {18.5}
Outlet/inlet tube size OD 2.5 2.5 2.5 2.5 2.5
Weight lbs {kg}
Installed 225 {102} 225 {102} 240 {109} 310 {141} 340 {155}
Voltage
Total Amps
208 V/3 phase/60 Hz 6.6 7.5 10.1 18.2 NA
240 V/3 phase/60 Hz 5.7 6.5 8.8 15.8 25.3
400 V/3 phase/50 Hz 3.5 3.9 5.4 9.5 14
480 V/3 phase/60 Hz 2.8 3.2 4.4 7.9 11.7
575 V/3 phase/60 Hz 2.4 2.7 3.7 6.6 9.7
Total kilowatts kw {BTU/min} 2.2 {125} 2.5 {142} 3.4 {193} 6.1 {347} 9.0 {512}
Water requirements {for optional aftercooler or precooler}
Recommended temperature* 45
°
- 85
°
F 45
°
- 85
°
F
Water flow gal./min. {liters/min.} 1 {3.8} 2 {7.6}
Water connections NPT 1/2 inch NPT
SPECIFICATION NOTES:
*
SCFM stands for standard cubic feet per minute, referenced to a pre-specified pressure, temperature and relative humidity. In most
cases, SCFM is referenced to 14.7 PSIA 68° F and 0% relative humidity. ACFM stands for actual cubic feet per minute, and must be
supplied with a temperature reference, due to the change in air density with temperature. Because dryers operate at a relatively low
pressure the effects on air density are negligible.
Dryers running at 50 HZ will have 17% less airflow, and a 17% reduction in material throughput.
Specifications may change without notice. Consult a Conair representative for the most current information.
D
A
C
B

Table of Contents

Related product manuals