B-2 l Appendix
Mounting the Dryer and Hopper on
a Mobile Floor Stand
CAUTION:
To prevent accident and injury, lift the empty hopper and the dryer onto
the mobile floor stand using a hoist and the lifting lugs provided.
1 Lift the hopper onto the mobile floor stand using a hoist and the lifting lugs
provided. Make sure you align the bolt holes in the mobile floor stand with the
bolt holes on the discharge assembly.
(continued)
Tools for installation:
❒ 5/32” Allen wrench
❒ 3/8” and 9/16” wrench
❒ Phillips screwdriver
❒ Flathead screwdriver
❒ Hoist and strap
To Next Page
Loading...
