High efficiency pumps
from 3/4 to 7.5 Hp. Silicon
carbide seals are standard.
Pump seal flush line
continuously cleans the
pump seal for extended life.
Incoloy heaters
minimize chemical and
high temperature damage
Built-in sediment trap
settles contaminants away
from the pump seals.
Motor drip cover
protects motor windings
from moisture damage.
Two-piece cast
construction
Alarm packages
Add an audible or visual alarm to call
attention to alarm conditions.
Motorized Cooling Valve
Slow open/close cycle time eliminates ther-
mal shock and water hammer from your
process circuit.
Compressed Air Mold Purge
Quickly evacuates fluid from the process
circuit, allowing for faster, cleaner discon-
nection of the temperature controller from
molds and hoses.
Stacking Rack
Save floor space by stacking Thermolators
two-high. The stacking rack can be used
only with single-zone models in 28-inch
high cabinets.
OPTIONS
Thermolator TW Series UGH025-0504
2-8 DESCRIPTION
FEATURES AND
OPTIONS
To Next Page
Loading...
