Condor AT0503 User Manual

Copyright © 2013, Condor Instruments Ltda. 49
Av. Brigadeiro Luis Antonio, 551, cj 124 - Cep:01318-000
PARAMETERS SELECTION
Field used to select some parameters to the chronobiology functions.
M10 AND L5 PARAMETERS
Calculate Method
 Entire Period: the M10 and L5 will be calculated
based on the entire period selected. This is the default
method.
 Average Day: this method calculates an average day
and then calculates M10 and L5 based on this day.
 Each Day: this method calculates the M10 and L5 for
each day separately.
Zero OffWrist (ZO)
In the calculation, considers the points that are marked
as "OffWrist" as zero.
Without OffWrist
(WO)
Do not use the points that are marked as "OffWrist" in
the calculation.
Max OffWrist M10
Maximum time for consider the "OffWrist" points in the
calculation. For example, if the Max OffWrist M10 is 30
minutes and some period of data has more than 30
minutes of "OffWrist" points, this period will not be used
in the calculation.
Max OffWrist L5
Maximum time for consider the "OffWrist" points in the
calculation. For example, if the Max OffWrist L5 is 30
minutes and some period of data has more than 30
minutes of "OffWrist" points, this period will not be used
in the calculation.

Condor AT0503 Specifications

General

Brand	Condor
Model	AT0503
Category	Adapter
Language	English