6
1.5.2 Rear Panel
❶
Fan —
Provides cooling to the Light
Source. Keep free of dust and dirt
accumulation.
❷
“MEMORY CARD” Slot —
Provides a
means for future software upgrades or
diagnosis by ConMed Linvatec authorized
representatives.
❸
“NETWORK”
Connector
— Optional
connector that can accept a cable from a
ConMed Nurse’s Assistant
®
(NA) or
Surgeon’s Assistant
®
(SA) to enable
external control by an NA or SA.
❹
“CAMERA” Connector —
This
connector accepts an ethernet cable only
from an optional ConMed Linvatec IM4000
series camera so that camera can control the
light source.
❺
Power Cord Receptacle
—
Accepts the
hospital grade power cord.
❻
Fuse Module —
Houses the fuses.
Equipped with two F6.3A, 250V (fast blow)
fuses. To replace a fuse, see
“3.4 Fuse
Replacement” on page 12
.
❹
❺
❸❷
❶
❻
To Next Page
Loading...
