Need help?Do you have a question about the ConMed LS7700 and is the answer not in the manual?
Verify proper OLED illumination, Membrane LEDs, and power up sequence.
Check lamp life hours decrease and verify light guide ring status.
Test stand-by mode, brightness settings, and light guide illumination.
Ensure light guide is securely held in place by the lever lock.
Verify the DOOR OPEN warning display and lamp behavior.
Check the adjustment and secure fit of the interlock switch.
Procedure to reset lamp hours via engineering mode.
Verify that the lamp hours have been successfully reset.
Review and complete the Device History record.
Steps for cleaning and preparing the unit for shipment.
Defines the intended application and use of the LS7700 Light Source.
Essential safety precautions, warnings, and hazards to avoid.
Steps for inspecting the light source and accessories upon receipt.
Explanation of symbols used throughout the manual.
Description of the front and rear panel features and controls.
Guidance on connecting power and accessories to the light source.
Step-by-step instructions for powering on and using the light source.
Detailed explanation of the light source's operational states and features.
Information on the expected lifespan of the light source.
Instructions for safely cleaning the light source and accessories.
Detailed steps for replacing the xenon lamp.
Instructions for safely replacing the unit's fuses.
Diagnosing and resolving common problems with the light source.
Explanation of how the light source operates internally.
Details on input voltage, power, weight, dimensions, and environmental requirements.
Information on lamp type, power, color temperature, and life.
List of recommended accessories and compatible equipment.
Contact information for assistance, repairs, and regulatory affairs.
General| Brand | ConMed |
|---|---|
| Model | LS7700 |
| Category | Medical Equipment |
| Language | English |
To Next Page