Need help?Do you have a question about the Connect Tech NVIDIA Jetson TX2 and is the answer not in the manual?
General| Memory | 8 GB LPDDR4 |
|---|---|
| Storage | 32 GB eMMC 5.1 |
| Camera Interfaces | 2 x MIPI CSI-2 |
| Power Consumption | 7.5W - 15W |
| SoC | NVIDIA Tegra X2 (TX2) |
| CPU | Dual-core Denver 2 + Quad-core ARM Cortex-A57 |
| GPU | NVIDIA Pascal, 256 CUDA cores |
| Video Output | HDMI 2.0, DisplayPort 1.2 |
| Connectivity | Gigabit Ethernet |
| USB | USB 3.0 |
| Operating System | Linux |
| Other Interfaces | I2C, SPI, UART, GPIO |
| Processor | Dual-core Denver 2 + Quad-core ARM Cortex-A57 |
Provides essential precautions for handling electronic components to prevent static discharge.
Specifies input voltage range and power consumption for modules and carrier.
Details the connector used for interfacing the Jetson module to the carrier.
Describes the expansion header for connecting peripherals and external IO.
Provides detailed signal descriptions for each pin of the System Expansion IO Connector.
Details the specifications and pinout of the HDMI Type-A connector.
Details the Gigabit Ethernet connector, including pinout and LED indicators.
Describes the microSD card slot, its connector type, and pinout.
Details the external USB 3.0 Type-A port, its specifications, and support notes.
Describes the USB OTG port, its connector type, and pinout.
Details the input power connector, its specifications, and type.
Provides instructions on how to wire the input power connector correctly.
Describes Connect Tech's custom L4T BSP and its benefits.
Explains NVIDIA Jetpack as an all-in-one package for Jetson development.
Details the procedure to place the system in Force USB Recovery Mode for software updates.
To Next Page