Connect Tech NVIDIA Jetson TX2 - ESD Warning

Orbitty Carrier for NVIDIA® Jetson™ TX2/TX2i
Users Guide
www.connecttech.com
Document: CTIM-00471
Revision: 0.14
Page 6 of 31 Date: 2021-10-05
ESD Warning
Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any
circuit board assemblies including Connect Tech
COM Express carrier assemblies, it is recommended
that ESD safety precautions be observed. ESD safe
best practices include, but are not limited to:
• Leaving circuit boards in their antistatic
packaging until they are ready to be installed.
• Using a grounded wrist strap when handling
circuit boards, at a minimum you should touch a
grounded metal object to dissipate any static
charge that may be present on you.
• Only handling circuit boards in ESD safe areas,
which may include ESD floor and table mats,
wrist strap stations and ESD safe lab coats.
• Avoiding handling circuit boards in carpeted
areas.
• Try to handle the board by the edges, avoiding
contact with components.
REVISION HISTORY
Revision
Date
Changes
0.00
2016/04/28
Preliminary Release
0.01
2016/06/13
First Production Release
0.02
2016/08/10
Fixed BSP Download Link
0.03
2016/11/04
Updated images and assembly drawing
0.04
2016/11/24
Added note on power supply, MSG064
0.05
2016/12/01
Added Power Requirements and update maximum input voltage
0.06
2017/04/18
Updated Power Supply Cable Drawing
0.07
2017/05/26
Updated power supplies; added TX2 specs
0.08
2017/07/11
Added cable drawing link, removed drawings from doc
0.09
2018/03/08
Added GPIO KDB link
0.10
2018/06/15
Added ENC001 Enclosure info, Added BSP Information
0.11
2018/07/31
Edited TX2i Thermal Details
0.12
2019/02/15
Added TX2i Power Circuitry Note
0.13
2019/04/17
Added HDMI 2.0 support
0.14
2021/10/05
Updated format, Updated address, Removed TX1 references