Contour NEXT User Manual

18 19
Contour
®
next blood glucose monitoring system
TESTING
65
1. If the blinking Meal Marker is
the one you want, press the
OK button
or
2. To select a dierent Meal
Marker, press the
or button
on the meter to scroll between
markers.
65
Example: If you scroll up to Before Meal, the
Before Meal marker blinks.
65
Example: If you scroll down to After Meal, the
After Meal marker blinks.
65
3. When the Meal Marker you want
is blinking, press the OK button.
4. If this is a Before Meal reading,
you can set a Reminder to test
your blood glucose later. See the
next section, Set a Reminder.
If you do not make a Meal Marker selection within 3 minutes, the meter
turns o. Your blood glucose reading is stored in the Logbook without a
Meal Marker.
Set a Reminder
1. Make sure the Reminder feature is On in Settings.
See Set Reminder Feature on page 44.
2. Mark a blood glucose reading as a Before Meal reading, then press
the OK button.
h2
3. To scroll from 2 hours to 0.5 hours by half-hour
intervals, press the or button.

Contour NEXT Specifications

General

Sample Size	0.6 µL
Testing Time	5 seconds
Memory Capacity	800 test results
Coding	No coding required
Power Source	Battery
Measuring Range	10 to 600 mg/dL
Battery	CR2032
Dimensions	77 x 57 x 19 mm
Weight	47.5 g
Operating Conditions	5°C to 45°C
Storage Conditions	-20°C