54 55
Contour
®
next blood glucose monitoring system
HELP
1. Clean the exterior of the meter using a moist (not wet) lint-free
tissue with soapy water, or disinfect for 1 minute using a disinfectant
solution made of 1 part bleach mixed with 9 parts water.
2. Wipe dry with lint-free tissue after cleaning.
3. Do not insert anything into the test strip port or attempt to clean
inside the test strip port.
Transfer Results to the Contour Diabetes app
You can automatically transfer results from your Contour next meter
wirelessly to your compatible smartphone or tablet. See Download the
Contour Diabetes app on page 51 and follow the app instructions
to pair your meter and get started.
CAUTION: The
Contour next meter has not been
tested or certied for use with any software other than the
Contour Diabetes app. The manufacturer is not responsible for
any erroneous results from the use of other software.
Transfer Results to a Personal Computer
You can transfer test results from the Contour next meter to a
computer where they can be summarized in a report with graphs and
tables. To make use of this feature, you need diabetes management
software and a 1-metre (or 3-foot) long USB-A to Micro USB-B cable.
This type of cable is available in electronics retail stores.
Ensure your meter’s USB port door is
completely closed when not in use.
CAUTION: Do not attempt to perform a blood glucose test when the
Contour next meter is connected to a computer.
CAUTION: Use only approved equipment from the manufacturer or
certied body such as UL, CSA, TUV, or CE.
To Next Page
Loading...
Need help?
General
