Contrec 212 - Page 47

212-M-V2.1
Set-up Mode 45
Parameter Value Description
15. 20mA xxxx.xxx Flowrate or temperature which
corresponds to 20mA.
17. PULSE Ener
Volu
Defines whether the pulse output is for
the
energy or volume total.
18. PULSE xxx.x kWh Defines how often a pulse is output.
19. PULSE 10 ms
20 ms
50 ms
100 ms
200 ms
500 ms
Defines the pulse width.
20. CLOCK xx
Hour/Min
Set time in hours and minutes.
Real time clock is able to run
without power for two days typically.
21. DATE xxxx
Year/Month/
Day
Set date in year, month and day.
Real time clock is able to run
without power for two days typically.
22. COMMS NONE
M-BUS
RS485
If no communications are to be used,
Set-up Mode continues at step 25.
Meter-bus (see Section 4).
Modbus RTU.
23. BAUD xxxx Communications baud rate between
300 and 9600.
24. PARITY Even/Odd/None Communications parity (with Meter-
bus the parity is not changeable and is
set to even parity).