Quick Setup with CME 2 Xenus XSL User Guide
106 Copley Controls Corp.
5.10.2: Auto Phase Procedure
NOTE: The following steps use a brushless rotary motor. The screens and sequences vary for
other motor types.
5.10.2.1 V
erify that the Enable Input is not activated.
5.10.2.2 Apply AC power.
5.10.2.3 Click Auto Phase ( ) to open the Auto Phase Motor Direction Setup screen.
5.10.2.4 Move the motor in the direction you wish to be considered positive.
The Actual Position value on the screen should change. If it does not change, see
Trouble Shoot Motor Direction Setup (p. 109).
5.10.2.5 Activate the Enable Input.
5.10.2.6 Click Next to display the Auto Phase Motor Wiring Setup screen.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
