Copley Controls Xenus XSL-230-36 - 2: Starting CME 2 and Choosing an Amplifier

Xenus XSL User Guide Quick Setup with CME 2
Copley Controls Corp. 83
5.3.2: Starting CME 2 and Choosing an Amplifier
NOTE: To immediately software disable the amplifier at any time while running CME 2, press
function key F12. Also, digital input 1 (IN1) should be configured as a hardware disable, and may
be used to disable the amplifier.
5.3.2.1 Verify CME 2 installation and serial port configuration.
5.3.2.2 Start CME 2 by double-clicking the CME 2 shortcut icon on the Windows desktop:
If you have selected an amplifier that has not been set up, the Basic Setup screen
appears.
5.3.2.3 If necessary, click the appropriate or amplifier in the Copley Neighborhood tree.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com