Copley Controls Xenus XSL-230-36 - CME 2 Installation and Serial Port Setup; 1: Requirements; 2: Downloading Software from Web (Optional); 3: Installing CME 2 Software

Xenus XSL User Guide Quick Setup with CME 2
Copley Controls Corp. 79
5.2: CME 2 Installation and Serial Port Setup
5.2.1: Requirements
Computer and Operating System
Minimal hardware requirements:
• CPU: Minimum: 166 MHZ*. Recommended minimum: 266 MHZ.
• RAM: Minimum: 64 MB*. Recommended minimum: 128 MB.
• At least one standard RS-232 serial port or a USB port with a USB to RS-232 adapter.
• At least one serial communication cable. Available from Copley Controls. Copley Controls
cable part number: SER-CK.
Operating Systems Supported: Windows 95, 98, ME, NT, 2000, XP.
*Using the minimum requirements will allow CME 2 to run, but performance will be significantly
reduced.
Software
Copley Controls CME 2 software, Version 4.0 or higher.
5.2.2: Downloading Software from Web (Optional)
5.2.2.1 Choose or create a folder where you will download the software installation file.
5.2.2.2 In an internet browser, navigate to
http://www.copleycontrols.com/Motion/Downloads/index.html .
5.2.2.3 Under Software Releases, click on CME 2.
5.2.2.4 When prompted, save the CME2.zip file to the folder chosen or created in
Step 5.2.2.1.
The folder should now contain a file named CME2.zip.
5.2.2.5 Extract the contents of the zip file to the same location.
The folder should now contain the files CME2.zip and Setup.exe.
5.2.2.6 If desired, delete CME2.zip to save disk space.
5.2.3: Installing CME 2 Software
5.2.3.1 If installing from a CD, insert the CD (Copley Controls part number CME2).
Normally, inserting the CD causes the installation script to launch, and a CME 2
Installation screen appears. If so, skip to Step 5.2.3.3.
5.2.3.2 If the software installation file was downloaded from the Copley Controls website,
navigate to the folder chosen or created in Step 5.2.2.1, and then double-click on
Setup.exe
OR
if you inserted the CD and the CME 2 Installation screen did not appear, navigate to the
root directory of the installation CD and then double-click on Setup.exe.
5.2.3.3 Respond to the prompts on the CME 2 Installation screens to complete the installation.
We recommend accepting all default installation values.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com